Universal Centrifuge

Centrifuge Z 287 A

The centrifuge Z 287 A is a real all-rounder! Provided with eleven different rotors, this unit covers the most common applications.

No matter if angle, swingout, plate or hematocrit rotor you will always find the suitable accessory for your needs. Its appealing design and the innovative control panel with “Touch-operation” function and LED light, which indicates the current operating state, complete the versatility of this model.

• max. Speed: 14000 rpm
• max. RCF: 16058 xg
• max. Volume: 6 x 50 ml
• Speed range: 200 - 14000 rpm
• Running time: 59 min 50 s / 10 s increments 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 35cm x 26cm x 43cm
• Weight: 18 kg

• Maintenance-free induction drive Microprocessor with large LCD display
Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion
• Active imbalance-identification and –cut off (rotor specific)
• Rotor exchange is easy to handle
• A large variety of rotors and accessories
• Manufactured in accordance to International Safety Regulations, i.e. IEC 61010
• Rotor exchange is easy to handle
• Improved ventilation system keeps samples cool


Displayfunktionen:

• Control panel with Touch-Operation
• Simple one-handed operation
• Glove-friendly
• Splash-proof foil keyboard
• Permanent indication of pre-set and actual values
• 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration
• Pre-selection of the running time, from 10 s to 99 h 59 min or continuous
Storage of up to 99 runs and Quick-key for short runs
• Color visual representation of the operating state such as standstill, sleep mode or centrifugation

Centrifuge Z 307

The small universal laboratory centrifuge offers a wide range of applications, which covers clinical laboratory requirements,research, as well as industrial laboratory use.

The Z 307 offers many accessories, including rotors for microtitreplates and high-speed fixed angle rotors for reaction vessels or centrifuge tubes up to 50 ml. Additionally, swing out rotors, which hold a volume of up to 4 x 200 ml can be used for tissue culture tubes and also for all common blood tubes.

This wide range of accessories makes the Z 307 laboratory centrifuge indespensable in research laboratories and small clinical laboratories.

• max. Speed: 14,000 rpm
• max. RCF: 18,624 xg
• max. Volume: 4 x 200 ml
• Speed range: 200 - 14,000 rpm
• Running time: 59 min 50 s / 10 s increments 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 35 cm x 33 cm x 47 cm
• Weight: 30 kg

• Brushless induction drive
• Microprocessor control
• Active imbalance detection and cut-off
• Motor driven lid lock
• Automatic rotor identification system with over speed protection
• Audible signal at the end of each run
• Emergency lid lock
• Stainless steel chamber
• Air cooling
• autoclavable rotors

 

Display functions
• Diagnostic program
• Program memory for 99 programs
• Quick-key for short runs
• 10 acceleration and 10 deceleration rates
• Possibility of unbreaked deceleration
• Permanent indication of preset and actual values
• Pre-selection of speed or RCF in steps of 50/10-er
• Pre-selection of running time from 10 sec to 99h 59min or continuous
• Simple one handed opertaion

Centrifuge Z 327

Both the table top centrifuge Z 327 and the refrigerated table top centrifuge Z 327 K offer a wide assortment of rotor options, making them ideal for a wide variety of research applications.

Rotor exchange between swing out, micro, or high volume angled rotors is very simple and can take place in a matter of seconds.

The Z 327 K includes the refrigeration system on the back side of the unit, optimized for the lab bench at only 40 cm wide.

• max. Speed : 18,000 rpm
• max. RCF: 23,542 xg
• max. Volume: 4 x 200 ml
• Speed range: 200 - 18,000 rpm
• Running time: 59 min 50 s / 10 s increments 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 40 cm x 36 cm x 48 cm
• Weight: 43 kg

• Brushless induction drive
• Microprocessor control
• Active imbalance detection and cut-off
• Motor driven lid lock
• Automatic rotor identification system with over speed protection
• Audible signal at the end of each run
• Emergency lid lock
• Stainless steel chamber
• Air cooling
• autoclavable rotors

 

Display functions
• Diagnostic program
• Program memory for 99 programs
• Quick-key for short runs
• 10 acceleration and 10 deceleration rates
• Possibility of unbreaked deceleration
• Permanent indication of preset and actual values
• Pre-selection of speed or RCF in steps of 50/10-er
• Pre-selection of running time from 10 sec to 99h 59min or continuous
• Simple one handed opertaion

Centrifuge Z 327 K

Both the table top centrifuge Z 327 and the refrigerated table top centrifuge Z 327 K offer a wide assortment of rotor options, making them ideal for a wide variety of research applications.

Rotor exchange between swing out, micro, or high volume angled rotors is very simple and can take place in a matter of seconds.

The Z 327 K includes the refrigeration system on the back side of the unit, optimized for the lab bench at only 40 cm wide.

• max. Speed : 18,000 rpm
• max. RCF: 23,542 xg
• max. Volume: 4 x 200 ml
• Speed range: 200 - 18,000 rpm
• Temperaturvorwahl: -20°C to 40°C
• Running time: 59 min 50 s / 10 s increments 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 40 cm x 36 cm x 70 cm
• Weight: 60 kg

• Brushless induction drive
• Microprocessor control
• Active imbalance detection and cut-off     
• Motor driven lid lock
• Automatic rotor identification system with over speed protection                    
• Audible signal at the end of each run
• Emergency lid lock
• Stainless steel chamber
• CFC-free refrigeration system (-20° to +40°C)
• autoclavable rotors

 

Display functions
• Diagnostic program
• Program memory for 99 programs
• Quick-key for short runs                
• Pre-cooling program
• Standstill cooling
• 10 acceleration and 10 deceleration rates        
• Possibility of unbreaked deceleration     
• Permanent indication of preset and actual values                        
• Pre-selection of speed or RCF in steps of 50/10-er
• Pre-selection of running time from 10 sec to 99h 59min or continuous
• Simple one handed opertaion

Centrifuge Z 366

These universal table top centrifuges Z 366 and Z 366 K putting new scales regarding the versatility, running features, easy handling and design.

Both, the tube capacity of 40 x 15 ml conical tubes and centrifugal forces up to 21379 xg, making these table top centrifuge Z 366 into a universal high-powered centrifuge.

• max. Speed: 15,000 min-1
• max. RCF: 21379 xg
• max. Volume: 6 x 250ml
• Speed range: 200 - 15000 rpm
• Running time: 59 min 50 s / 10 s increments 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 43 cm x 36 cm x 51 cm
• Weight: 52 kg

• Brushless induction drive
• Microprocessor control
• Active imbalance detection and cut-off     
• Motor driven lid lock
• Automatic rotor identification system with over speed protection
• Audible signal at the end of each run
• Emergency lid lock
• Stainless steel chamber
• Air cooling
• autoclavable rotors

 

Display functions
• Diagnostic program
• Program memory for 99 programs
• Quick-key for short runs
• 10 acceleration and 10 deceleration rates
• Possibility of unbreaked deceleration
• Permanent indication of preset and actual values
• Pre-selection of speed or RCF in steps of 50/10-er
• Pre-selection of running time from 10 sec to 99h 59min or continuous
• Simple one handed opertaion

Centrifuge Z 366 K

These universal table top centrifuges Z 366 and Z 366 K putting new scales regarding the versatility, running features, easy handling and design.

Both, the tube capacity of 40 x 15 ml conical tubes and centrifugal forces up to 24325 xg, making these table top centrifuge Z 366 K into a universal high-powered centrifuge.

• max. Speed: 16,000 rpm
• max. RCF: 24325 xg
• max. Volume: 6 x 250ml
• Speed range: 200 - 16000 rpm
• Temperature range: -20°C to 40°C
• Running time: 59 min 50 s / 10 s increments 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 72 cm x 36 cm x 51 cm
• Weight: 77 kg

• Brushless induction drive
• Microprocessor control
• Active imbalance detection and cut-off     
• Motor driven lid lock
• Automatic rotor identification system with over speed protection
• Audible signal at the end of each run
• Emergency lid lock
• Stainless steel chamber
• CFC-free refrigeration system (-20° to +40°C)
• autoclavable rotors

 

Display functions
• Diagnostic program
• Program memory for 99 programs
• Quick-key for short runs
• Pre-cooling program
• Standstill cooling
• 10 acceleration and 10 deceleration rates        
• Possibility of unbreaked deceleration     
• Permanent indication of preset and actual values
• Pre-selection of speed or RCF in steps of 50/10-er
• Pre-selection of running time from 10 sec to 99h 59min or continuous
• Simple one handed opertaion

Centrifuge Z 446

These high-volume centrifuges Z 446 and Z 446 K achieve a throughput of 68 x 15 ml conical tubes or 28 x 50 ml conical tubes at a max.RCF of 3434/4346 xg.

If higher speeds are required, we also offer e.g. an angle rotor with a max. RCF of 14532/16022 xg for 10 x 50 ml. The fixed-angle and swing-out rotors are suitable for almost all aplications in everyday use in clinical, industrial and research laboratories.

• max. Speed: 16,000 rpm
• max. RCF: 24325 xg
• max. Volume: 4 x 750 ml
• Speed range: 200 - 16000 rpm
• Running time: 59 min 50 s / 10 s increments 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 54 cm x 39 cm x 67 cm
• Weight: 79 kg

• Brushless induction drive
• Microprocessor control
• Active imbalance detection and cut-off
• Motor driven lid lock
• Automatic rotor identification system with over speed protection
• Audible signal at the end of each run
• Emergency lid lock
• Stainless steel chamber
• Air cooling
• autoclavable rotors

 

Display functions
• Diagnostic program
• Program memory for 99 programs
• Quick-key for short runs
• 10 acceleration and 10 deceleration rates
• Possibility of unbreaked deceleration
• Permanent indication of preset and actual values
• Pre-selection of speed or RCF in steps of 50/10-er
• Pre-selection of running time from 10 sec to 99h 59min or continuous
• Simple one handed opertaion

Centrifuge Z 446 K

These high-volume centrifuges Z 446 and Z 446 K achieve a throughput of 68 x 15 ml conical tubes or 28 x 50 ml conical tubes at a max.RCF of 3434/4346 xg.

If higher speeds are required, we also offer e.g. an angle rotor with a max. RCF of 14532/16022 xg for 10 x 50 ml. The fixed-angle and swing-out rotors are suitable for almost all aplications in everyday use in clinical, industrial and research laboratories.

• max. Speed: 16,000 rpm
• max. RCF: 26328 xg
• max. Volume: 4 x 750 ml
• Speed range: 200 - 16000 rpm
• Temperature range: -20°C to 40°C
• Running time: 59 min 50 s / 10 s increments 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 73 cm x 39 cm x 67 cm
• Weight: 111 kg

• Brushless induction drive
• Microprocessor control
• Active imbalance detection and cut-off     
• Motor driven lid lock
• Automatic rotor identification system with over speed protection
• Audible signal at the end of each run
• Emergency lid lock
• Stainless steel chamber
• CFC-free refrigeration system (-20° to +40°C)
• autoclavable rotors

 

Display functions
• Diagnostic program
• Program memory for 99 programs
• Quick-key for short runs
• 10 acceleration and 10 deceleration rates
• Possibility of unbreaked deceleration
• Permanent indication of preset and actual values
• Pre-selection of speed or RCF in steps of 50/10-er
• Pre-selection of running time from 10 sec to 99h 59min or continuous
• Simple one handed opertaion

en_GBEnglish (UK)

This centrifuge model and its accessories are an IVD device according to IVDR (EU) 2017/746. It is intended for the separation of mixtures of substances of different densities, in particular for the preparation and processing of samples from the human body in the context of an in vitro diagnostic application, in order to enable the intended use of the in vitro diagnostic medical device. It must not be used to determine any measured values and after centrifugation, no components of human origin may be implanted or administered back into the body.

WordPress Cookie Plugin by Real Cookie Banner