• Phone + 49 (0) 7426 9622 11
  • info@hermleLT.de
  • Contact

Large-Volume Centrifuges

Centrifuge Z 446

These high-volume centrifuges Z 446 and Z 446 K achieve a throughput of 68 x 15 ml conical tubes or 28 x 50 ml conical tubes at a max.RCF of 3434/4346 xg.

If higher speeds are required, we also offer e.g. an angle rotor with a max. RCF of 14532/16022 xg for 10 x 50 ml. The fixed-angle and swing-out rotors are suitable for almost all aplications in everyday use in clinical, industrial and research laboratories.

• max. Speed: 16,000 rpm
• max. RCF: 24325 xg
• max. Volume: 4 x 750 ml
• Speed range: 200 - 16000 rpm
• Running time: 59 min 50 s / 10 s increments 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 54 cm x 39 cm x 67 cm
• Weight: 79 kg

• Brushless induction drive
• Microprocessor control
• Active imbalance detection and cut-off
• Motor driven lid lock
• Automatic rotor identification system with over speed protection
• Audible signal at the end of each run
• Emergency lid lock
• Stainless steel chamber
• Air cooling
• autoclavable rotors

 

Display functions
• Diagnostic program
• Program memory for 99 programs
• Quick-key for short runs
• 10 acceleration and 10 deceleration rates
• Possibility of unbreaked deceleration
• Permanent indication of preset and actual values
• Pre-selection of speed or RCF in steps of 50/10-er
• Pre-selection of running time from 10 sec to 99h 59min or continuous
• Simple one handed opertaion

Brochure Z 446
Z446_freistller
csm_221.36_V02__2__63a6774cc2

Centrifuge Z 446 K

These high-volume centrifuges Z 446 and Z 446 K achieve a throughput of 68 x 15 ml conical tubes or 28 x 50 ml conical tubes at a max.RCF of 3434/4346 xg.

If higher speeds are required, we also offer e.g. an angle rotor with a max. RCF of 14532/16022 xg for 10 x 50 ml. The fixed-angle and swing-out rotors are suitable for almost all aplications in everyday use in clinical, industrial and research laboratories.

• max. Speed: 16,000 rpm
• max. RCF: 26328 xg
• max. Volume: 4 x 750 ml
• Speed range: 200 - 16000 rpm
• Temperature range: -20°C to 40°C
• Running time: 59 min 50 s / 10 s increments 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 73 cm x 39 cm x 67 cm
• Weight: 111 kg

• Brushless induction drive
• Microprocessor control
• Active imbalance detection and cut-off     
• Motor driven lid lock
• Automatic rotor identification system with over speed protection
• Audible signal at the end of each run
• Emergency lid lock
• Stainless steel chamber
• CFC-free refrigeration system (-20° to +40°C)
• autoclavable rotors

 

Display functions
• Diagnostic program
• Program memory for 99 programs
• Quick-key for short runs
• 10 acceleration and 10 deceleration rates
• Possibility of unbreaked deceleration
• Permanent indication of preset and actual values
• Pre-selection of speed or RCF in steps of 50/10-er
• Pre-selection of running time from 10 sec to 99h 59min or continuous
• Simple one handed opertaion

Brochure Z 446 K
Z446K_freisteller
csm_221.36_V02__2__01_75cf36a0f9

Centrifuge ZK 496

The ZK 496 is a large volume floor-standing centrifuge, which is also available as a space - saving underbench model. Both models are provided with a powerful cooling system to keep your samples cool.

Its huge volume allows a large number of samples to be centrifuged, up to 4 x 1000 ml. The field of application of the ZK 496 ranges from clinical applications through research to industrial applications you can use it in the blood bank field, too. Our blood bag buckets of 500 ml or 750 ml are available for triple and quad blood bags.

In additional to the multifunctional swing out rotor, high-speed fixed angle rotors with a maximum capacity of 6 x 250 ml or 4 x 500 ml are also available! This enables a fast and efficient separation of samples in high-throughput laboratories.

• max. Speed: 10,500 rpm
• max. RCF: 16,022 xg
• max. Volume: 4 x 1,000 ml
• Speed range: 10-10,500 rpm
• Temperature range: -20°C to 40°C
• Running time: 59 min 50 s / 10 s increments 99 h 59 min / 1 min increments
• Dimensions (WxHxD): Floor-Standing unit 62 cm x 98 cm x 69 cm

• Untertischzentrifuge 62 cm x 70 cm 69 cm
• Weight: 190 kg / 157 kg

• Brushless induction drive
• Microprocessor control
• Active imbalance detection and cut-off
• Motor driven lid lock
• Automatic rotor identification system with over speed protection
• Emergency lid lock
• Stainless steel chamber
• CFC-free refrigeration system (-20° to +40°C)
• Autoklavierbare und hermetisch dichte Rotoren

 

Display functions
• Diagnostic program
• Program memory for 99 programs
• Quick-key for short runs
• Pre-cooling program
• Standstill cooling
• 10 acceleration and 10 deceleration rates        
• Possibility of unbreaked deceleration
• Permanent indication of preset and actual values
• Pre-selection of speed or RCF in steps of 50/10-er
• Pre-selection of running time from 10 sec to 99h 59min or continuous
• Simple one handed opertaion

Brochure ZK 496
csm_ZK496_Standgeraet_01_6d010bc3bc
csm_Untertischgeraet_offener_Deckel_01_581f0992e2

HERMLE Labortechnik GmbH

Siemensstr. 25

78564 Wehingen

Phone + 49 (0) 7426 9622 11

Fax + 49 (0) 7426 962 249

info@hermleLT.de

en_GBEnglish (UK)
de_DEDeutsch en_GBEnglish (UK)

This centrifuge model and its accessories are an IVD device according to IVDR (EU) 2017/746. It is intended for the separation of mixtures of substances of different densities, in particular for the preparation and processing of samples from the human body in the context of an in vitro diagnostic application, in order to enable the intended use of the in vitro diagnostic medical device. It must not be used to determine any measured values and after centrifugation, no components of human origin may be implanted or administered back into the body.

Products

Applications

WordPress Cookie Plugin by Real Cookie Banner